Cab's Blog

Now this one is sweet and makes the Qtek S200, the daddy for voice commands.

Install Voice Command to the default location.

- Fire up a registry editor (PHM is a goody)

- Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand

- Modify the string marked “path” from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe

Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It’s reponses will be played through the headset too.

Alex!

Born around midday.

What makes this day extra special, is that England beat France in the Rugby!

England 14-9 France

Photos to follow…

To fix the error:

Unable to obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.

Fire up your registry editor then head to:

[HKEY_LOCAL_MACHINE\Comm\RNDISFN1\Parms\TcpIp]

Set AutoCfg to 1

Set EnableDHCP to 0

Soft reset the device and there should be no further errors!

Kindly swiped from :

http://www.nullify.net/ViewArticle.aspx?article=263

This is a handy utility for redirecting all audio from your WM phone to your bluetooth headset:

BT Toggle

I’ll post up a link (watch out for the link in the comments section) when I download a backup copy just in case the original disappears.

I still think it’s the dogs nads.

However, when you install all manner of s/w on the phone, that can cause, er, issues. THe latest s/w install caused the phone to really screw up and I needed to perfom a hard reset. How do you do this when you can’t get to the OS?

Check this link

Otherwise do the following:

HTC Prophet (Qtek S200,Imate JASmin etc)

- Press and hold the CAMERA and COMM MANAGER buttons, and use the stylus to press the RESET button.
- Hold the CAMERA and COMM MANAGER buttons until the following message is displayed: “Press Send to restore factory default or press other key to quit".

I think “Send” was the green phone button, but can’t remember. Pressing all the keys eventually worked